We have designed this set as it contains everything you will need to get your newly created enamels to a perfect finished product. All these products we use ourselves in our work and they have never failed to
deliver fantastic results
In the set you will receive the following:
1x 100 & 200 Diamond Grit Sanding sponges-these make the job of grinding the enamels so much quicker and easier if you are grinding by hand.
1x 1"mandral + wet & dry sanding discs (10 x 10,000, 5000, 3000, 2000, 1200, 800, 400 & 240 grit). You may want to use these to polish the cloisonne wires once they are exposed from under newly ground enamel
1 x 10g Cerium & Tin Oxide (90/10 ratio mix). This is fantastic for a high shine on the finished enamel. Mix a small amount with water (it goes a long way so you won't need much if you are doing a single piece).
1 x 15g Superfine Pumice powder. Use as an alternative to Cerium & Tin Oxide
8 x 25mm, 1" Radial bristle brushes 220 grit, 400 grit, 600 grit & 1000 grit. For grinding and polishing metal,(no polish needed).
6 x Compressed Felt assorted wheels & mandrel (3mm shank), These felt wheels would be used with a polish (tripoli) on your chosen metal.
1 x Nylon Wool mandrel (3mm shank) used with polish for intermediate scratches
1 x Cotton Wool Mandrel (2.35mm Shank) soft polishing
4 x Different sized Goat Hair Brush Mandrels ( 25mm, 2.35mm shank) final polishing with rouge. smaller tip goat hair brushes will get to places others cannot reach. These are to be used at a slow to medium speed.
A small piece of tripoli & rouge to get you started.
1 x Polish Cloth
1x Buffer Stick- removes scratches from metal
* Please always use the appropriate PPE when carrying out any polishing work*
